 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FEATURES AND SPECIFICATIONS 0.50mm (.020") Pitch LaneLinkTM 4X Cable Assemblies 74527 SAS 74530 SATA I/O LaneLinkTM assemblies feature sturdy jack-screw hardware to guarantee secure mating The new 4X Serial Attached SCSI (SAS) and Serial ATA These 4X SAS and SATA I/O assemblies complement (SATA) cable assemblies are the latest addition to the broad line of Molex's LaneLink offerings. The Molex's extensive LaneLink product line. Molex's following list details Molex's extensive LaneLink superior design and engineering along with state-ofproduct line: the-art manufacturing combine to provide a solution I 4X InfiniBand Latch Cable Assembly (Series 74506) for all external, 4X SAS and SATA Input/Output (I/O) I 4X 10GBASE-CX4 Latch Cable Assembly (Series applications. 74526) I 4X and 12X InfiniBand Latch Receptacle (Series LaneLink 4X SAS and SATA I/O cable assemblies are 91804) designed and engineered to meet the architecture set I 4X and 12X InfiniBand Jackscrew Receptacle forth by the T10 SCSI specification. The standard (Series 91803) specifies a high-speed, point-to-point technology, initially designed to operate at speeds up to 3 Gbps, with a roadmap to operate at 12 Gbps. Customer protocol requirements determine which assembly is used, as both designs are identical. With storage requirements escalating and becoming more complex, factors such as larger capacity, greater density, security, scalability and accessibility are more critical than ever. Enterprise solutions are recognizing increasing pressure for substantial capacity, performance, lower failure rates and greater choice of components. SAS and SATA I/O solutions meet these demands while providing the highest performance available. Molex is an active member of the SCSI and SATA trade associations. LaneLink 4X assemblies have been accepted by multiple standards groups, or Multi-Source Agreement (MSA) groups, including the T10 SCSI specification, SAS, SATA I/O, 4X and 12X InfiniBand*, 10 Gigabit Ethernet and 10 Gigabit Fibre Channel. Features and Benefits I Sturdy jackscrew hardware provides user with guaranteed mating with the PCB connector I Molex offers a total system solution providing an industry standard compatible interface with 4X mating connectors SPECIFICATIONS Reference Information Mates With: 91803-XXXX (jackscrew) Designed In: Millimeters Electrical Voltage: 30V AC per contact Current: 0.5A per contact Contact Resistance: 80 ohms Dielectric Withstanding Voltage: 300V min. DC Insulation Resistance: 1000 Megohms minimum between adjacent contacts Mechanical Mating Force: 55.5N (12.36 lbf.) Unmating Force: 49.0N (11.02 lbf.) Durability: 250 cycles Physical Housing: Zinc die-cast Contact: Gold flash over Nickel plating Plating: Contact Area - Nickel Solder Tail Area - Nickel allover Underplating - Gold flash over Paladium Nickel Operating Temperature: -20 to + 85C SAS (series 74527) cable assembly mating to 4X jackscrew receptacle (series 91803) I High performance production test rack provides 100% eye pattern testing to SAS and SATA I/O standards I Break-out cables (SAS to SATA) provide an external-to-internal connection I LaneLink assemblies are SFF-8470 compliant to meet industry specifications *InfiniBand is a registered trademark of the InfiniBand Trade Association APPLICATIONS 0.50mm (.020") Pitch LaneLinkTM 4X Cable Assemblies 74527 SAS 74530 SATA I/O I Server storage applications - Network Interface Cards (NIC) and Host Bus Adapters (HBA), routers and servers, storage racks - Redundant Array of Integrated Discs (RAID) devices I Industry standard organizations: - 4X and 12X InfiniBand - 10 Gigabit Ethernet - 10 Gigabit Fibre Channel - T10 SCSI/SAS - T13 SATA - SFF Committee Complete end-to-end solution available from Molex; controller card to backplane to SAS or SATA drive ORDERING INFORMATION SAS Cable Assemblies (74527) Order No. 74527-3001 74527-3002 74527-3004 74527-3006 74527-3008 26 AWG 24 AWG 28 AWG Wire Size Cable Length 0.50m (1.64') 1.00m (3.28') 3.00m (9.84') 5.00m (16.40') 7.00m (22.97') SAS Specification SATA I/O Cable Assemblies (74530) Order No. 74530-0001 74530-0002 74530-0003 74530-0004 74530-0005 26awg 24awg 28awg Wire Size Cable Length 0.50m (1.64') 1.00m (3.28') 3.00m (9.84') 5.00m (16.40') 7.00m (22.97') SATA I/O cables Specification Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.com Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 feninfo@molex.com Far East South Headquarters Jurong, Singapore 65-6-268-6868 fesinfo@molex.com European Headquarters Munich, Germany 49-89-413092-0 eurinfo@molex.com Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 Visit our Web site at http://www.molex.com/product/io/lanelink.html Order No. USA-309 Printed in USA/JI/2005.05 (c)2005 Molex |
Price & Availability of 74527-3001
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |